Fleck 5600SXT Manuel d'installation - Page 13
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Fleck 5600SXT. Fleck 5600SXT 14 pages.
Également pour Fleck 5600SXT : Manuel d'instructions d'installation (19 pages), Programmation (3 pages)
Imprimer la page
13) The display should now show
shown in Figure 13-A. This indicates the system
will regenerate at 2:00 AM following the day the
water consumption has passed the calculated
capacity. If you prefer an alternate regeneration
time, please enter it here and then press the
REGEN button to advance
15) The display should show
Figure 13-C. This indicates Brine Draw time is 60
minutes long. Do not change this value and press
the REGEN button to advance to the next setting
17) The display may now show
cates the length of the Brine Fill cycle during re-
Use the value listed on page 2/
generation. i
calculated on pages 4 and 5
UP or DOWN button to adjust this. Then press
REGEN as shown in Figure 13-E
Help: 888-426-5001
rT / 2:00
as
F I G u R e 13 - a
Bd / 60
as shown in
F I G u R e 13 - C
BF / 10
. This indi-
and then use the
F I G u R e 13 - e
QualityWaterForLess.com
14) The display should now show
shown in Figure 13-B. This indicates Backwash
time is 10 minutes long. Do not change this
value and press the REGEN button to advance to
the next setting
16) The display may now show
Figure 13-D. This indicates Rapid Rinse time is 12
minutes long. Do not change this value and press
the REGEN button to advance to the next setting
18) The display may now show
in Figure 13-F. This indicates Flow Meter type
3/4" Turbine. Set the setting to t0.7 if you have
the 3/4" turbine meter or P0.7 for the 3/4" paddle
wheel meter. Press the REGEN button to ad-
vance to the home screen
t u R B I n e
Pa d d l e
BW / 10
as
F I G u R e 13 - B
rr / 12
as shown in
F I G u R e 13 - d
FM / t0.7
as shown
F I G u R e 13 - F
PAGE 13