Fleck 7000SXT Manuel d'installation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Fleck 7000SXT. Fleck 7000SXT 17 pages.

Now that you have the adapter in place you can attach your drain line. (Do NOT attach your drain line to

the elbow on the brine tank; it will overflow the brine tank). Running the drain line to a house drain such

as where your washing machine drain line goes is an excellent choice, if this is not possible then you can

drain into another area of your choice; Note: Do not run drain line to plants, shrubs, trees or a lawn unless

using potassium chloride instead of rock salt, make sure you have an air gap if going into a pipe. (Air Gap:

Open area where there is no standing water). Your drain line can be elevated up to 5 feet over/above

where it comes out of the valve and up to 100 feet away. Remember to always follow your local codes.

6. Slide a 1/2" hose clamp over the drain line then slide the drain line over drain hose barb. Slide hose clamp

over the drain and barb, tighten the clamp.

7. Plug your power cord into a nearby outlet that is not connected to a switch.

-Continue to page 6 for Brine tank assembly Instructions -

Page 5 of 17

Fleck 7000 SXT

http:// www.Qualitywatertreatment.com