DockStar Smart Thruster Manuel d'utilisation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} DockStar Smart Thruster. DockStar Smart Thruster 15 pages. Stern
Également pour DockStar Smart Thruster : Manuel d'installation (16 pages)

Imprimer la page

After confirming that

the

sheer

properly seated in the

propeller's

rear

slot,

apply some thread lock

to the shaft and hand

screw in the propeller

nut. Using the sprocket

wrench,

tighten

the

propeller

nut

firmly.

Let the thread lock dry

thoroughly

before

submerging

the

propellers in the water.

When properly installed the propellers should look like the one on the right. There

should be about a 3/16" gap between the larger diameter of the motor and the

propeller hub. There should be no play in the propeller and you should feel a

slight resistance from the motors when you spin the propeller.

DockStarThrusters.com

Page 8 of 15