AKOR FINETECH SM100 Manuel de l'utilisateur - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AKOR FINETECH SM100. AKOR FINETECH SM100 5 pages.
Imprimer la page
Use a clean dry cloth or slightly damp to clean the soundbar. Do not use any solvent.
BATTERY INSERTION
Open the battery compartment on the back of the station and wireless sensor, and insert two identical LR3
batteries, respecting the polarities in each module.
FUNCTIONS
Weather station with wireless outdoor sensor
▪ Weather forecast: sunny, slightly cloudy, cloudy and rainy.
▪ Time with 12/24 hour display with alarm clock and calendar.
▪ Temperature in °C or °F.
▪ Indoor temperature between -9°.9°C and +50°C, tolerance ± 0.1°C, detection every 30 seconds.
▪ Outdoor temperature between -35°C and +70°C, tolerance ± 0.1°C, detection every 50 seconds.
▪ Indoor humidity between 20% and 95%, tolerance ± 0.1°C, detection every 30 seconds.
▪ Backlit colour display.
START
When power is turned
the temperature and humidity.
The default values are :
Alarm clock: 7:00.
The unit of temperature: °C
Clock format: 24HR
Weather forecast: slightly cloudy.
Calendar: 01.01.2008
Clock: 0.00
WIRELESS SENSOR
After powering on, and for 3 minutes, the wireless sensor automatically detects the channel and displays the
temperature. During this time the symbol
Once the channel is found, the signal
If the temperature is not displayed" --,--" after 60 minutes, the sensor searches for another channel for 3
minutes until the correct channel is found.
USE
The Weather Station has 6 function buttons: MODE, UP, DOWN, MAX/MIN, °C/°F and SNZ/LIGHT.
A short press on "MODE" allows you to check the alarm time.
A long press on "MODE" gives access to the date, time, alarm clock and time format settings (12/24h).
A short press on "MIN/MAX" allows the display of minimum or maximum temperatures (indoor and outdoor), as
well as the maximum or minimum humidity level.
A long press on "MIN/MAX" erases the temperature and humidity history.
A short press on "UP" allows you to change channels if you have more than one wireless sensor.
A long press on "UP" erases the data of the current channel and starts to detect the temperature again.
A short press on "°C/°F" allows you to change the temperature unit.
SETTINGS
Time
Press "MODE" to display the time.
Press "MODE" for 2 seconds to access the clock setting.
The year appears flashing, use the "UP" and "DOWN" buttons to adjust it, then press "MODE" to change to the
Month setting, then the Day, then the hour format (12/24h) then the hour, the minute.
If you do not act for 30 seconds, the device exits the parameter setting mode.
on,
the display lights up for 3 seconds, the unit beeps once, then detects and displays
flashes.
no longer flashes and then disappears from the display.
4