Fleetwood L - 06 Manuel d'instruction - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Fleetwood L - 06. Fleetwood L - 06 6 pages. Industrial blenders

Imprimer la page

Always unplug the machine when emergency cases arise.

4.7 Advice

Electrical or mechanical maintenance must be done by qualified personal for such

operation.

Person in charge has to be sure that the machine is under TOTAL SAFETY

conditions when working.

5 Analysis and Problems Solving

5.1 Problem, causes and solutions

The Heavy Duty Industrial Blenders were designed to operate with the need of

minimum maintenance but the natural wearing caused by longer use of the equipment may

occasionally cause some malfunctions.

If such problem occurs with your Blender refer to Table 02 in which the most

common situations are listed with recommended solutions.

Problems

* The machine does not turn

* Lack of power.

on.

* Problem in the electric circuit

of the machine. interno ou

externo da máquina.

*Cup is leaking.

* Damaged seal.

* The machine turns on but

* Defected motor capacitor.

the Motor turns slowly.

5.2 Electrical Diagram Mod. L-02/04/06/08/10HD

Chave Liga/Desliga

IMPORTANT

Table 02

Causes

Solutions

* Check if machine is

plugged in and if there is

power in the power supply

source.

* Call technical assistance.

Chave Seletora 110/220 Volts

SUMMARY

Introduction

1.1 Safety

1.2 Main Components

1.3 Technical Characteristics

2. Installation and Pre Operation

2.1 Installation

2.2 Pre Operation

Operation

3.1 Starting

3.2 Operating Procedures

3.3 Cleaning

4. General Safety Practices

4.1 Basic Operation Procedures

4.2 Safety Procedures and Notes Before Switching the Machine On

4.3 Routine Inspection

4.4 Operation

4.5 After Finishing the Work

4.6 Maintenance

4.7 Advices

5. Analysis and Problem Solving

5.1 Problems, Cause and Solutions

5.2 Electric Diagram Mod. L-02/04/06/08/10HD