Fleetwood 8333611 Instructions de montage - Page 2

Parcourez en ligne ou téléchargez le pdf Instructions de montage pour {nom_de_la_catégorie} Fleetwood 8333611. Fleetwood 8333611 2 pages.

Carrel (Low & High) Assembly Instructions

4. Lock the worksurface together with back panel by using 2

angle brackets. Fasten the brackets to the bottom rear of

the worksurface first using the supplied #8 x 5/8 screws.

Fasten to the back panel to eliminate any gap. Next, repeat

at the front edge of the worksurface and end/intermediate

panel using additional screws. Repeat the process on all

worksurfaces.

6. Locate the wire management trough. Align the holes in the

wire management trough to the holes in the back panel

below the worksurface. Attach by using #8 x 5/8 screws .

For questions, please call us at (616) 396-1142

5. *Note: Low carrels are sold without shelves. Skip this

step if you purchased low carrels.

Locate the shelves. Attach the shelves to the

end/intermediate panel. Lower the shelves over the

shoulder screws above the worksurface and slide

toward the back panel to engage the shoulder screws.

Use a rubber mallet to properly seat the modular clips.

Repeat this step for all remaining shelves.

7. Insert the wire management grommets into

ends, intermediate panels and worksurfaces

83.33-36-INST

Rev. A

Page 2 of