ETA Systems PD9L Manuel du propriétaire et instructions d'utilisation - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire et instructions d'utilisation pour {nom_de_la_catégorie} ETA Systems PD9L. ETA Systems PD9L 2 pages.
Imprimer la page1
2
INSTRUCTIONS TO REPLACE LIGHT TUBE LAMP (Reference diagrams above.)
1. Extend and hold light tubes, turn cap clockwise and pull to remove cap.
2. With light tube three quarters of full extension, insert index finger in light source hole at base of lamp, gently push bulb and
socket through the cap's hole and replace lamp.
3. Reset socket with white mark on top, opposite light source hole, gently force lamp and socket back into light tube to a firm
fit. (It may be necessary to joggle socket with one hand and guide with finger in light source hole to get proper placement.)
4. Hold light tube and snap cap back into place. Twist cap counter-clockwise firmly.
NOTE: Replacement lamp is a standard 120 volt, 4 watt incandescent lamp. (Christmas tree lamp)
Thank you for considering and
purchasing an ETA Conditioned
Power Distribution unit.
By listening to our large base of
present and past customers, and
drawing upon many years of exper-
ience in design and solving high
amperage lighting and conditioned
power distribution needs, ETA has
developed an extensive line of
Audio Conditioned Power Distribu-
tion units to protect a broad range of
sensitive electronic equipment.
ETA offers a complete line of
power conditioning units in addition
to the PD9L and the PD9LV models.
The product line includes 12 models
of professional Audio Conditioned
Power Distribution units that are UL
listed and include features such as
sequential power up/power down,
high amperage output, and AC
voltage regulator units.
3
4
SPECIFICATIONS:
Input Voltage
Spike protected
UL 1449 suppressed
voltage rating
Response time
Operating temp. range
Maximum energy dissipation
Maximum surge current
Maximum surge voltage
Noise attenuation
(1.5 kHz to 200 mHz )
All designs and specifications are subject to change without notice. Copyright © 1998 ETA Systems.
120V AC
Line to neutral, neutral to ground,
line to ground
395V
< 1NS Typical
– 40° to +158° F
450 joules (3 x 150)
12000A
6000V
Transverse up to 20 dB
®
SYSTEMS
A Creative Light & Sound Company
Division of National Biological Corporation
1532 Enterprise Parkway • Twinsburg, Ohio 44087
330-425-3388 • 800-321-6699 • Fax: 330-425-9700
http://www.etasys.com E-mail [email protected]
™