Etabeta electronics NT-16 Manuel d'utilisation - Page 17

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Etabeta electronics NT-16. Etabeta electronics NT-16 18 pages.

Imprimer la page

System Settings

Press the SYS button to enter the system setting page

1. About the machine: here you can view the machine model, firmware version number, application

version number, serial number of information.

2. Network: You can change the network IP address here.

3. Custom layer: set the custom channel in the custom layer, and then press the INPUT/OUTPUT button

together to enable the function of the custom layer.

4. Language: Here to modify the language, the machine supports Chinese language and English language.

5. Update: Software can be updated here.

Download the update software to the USB flash drive, then plug the USB flash drive into the mixer, click

the button to open the update, it will automatically recognize that the software will automatically update,

you need to wait.

6. Restore factory Settings: one key can be pressed to restore the machine parameters to the original

factory Settings.

Mp3/ sound card playback and recording

last song The next song

Play/Pause

How to access the MP3 page:

1. Press the DISP button in the MP3 operation area to enter the MP3 page.

2. Plug in the U disk with the song, and the U disk will be automatically identified.So that the song is displayed.

Learn about MP3 pages:

1. The directory area can be swiped up and down to turn pages.

2. This area is Last, Pause/Play, Next, Random/Single Loop/Sequence.

3. Start recording and pause recording, recording will automatically appear the name of the recording file,

recording is REC button will keep flashing.

4. The total pause (can pause the playback or recording pause), song positioning, song deletion.

Note:

When recording, the recording signal is the main output signal, so the recording must ensure that the main

output signal output is normal, otherwise it will not record the sound

Sound card recording needs to be connected to the computer through the USB cable, open the recording

software on the computer, select the sound card of the mixer,MP3 recording directly to the U disk inside.

System setti ng

About

Language

Software Update

The recording

Enter the page button

Network

Custom Layer

Factory Reset

V：T16-1.6.7

USB STICK

File 1.4441131

File 2.454564564

File 3.46274646

File 4.79134

File 5.248643

File 6.156876216348

Lyrics 00.012132

Play page

Item

00:00