DocuPen DocuPen RC800 Series Manuel d'utilisation - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} DocuPen DocuPen RC800 Series. DocuPen DocuPen RC800 Series 16 pages. Portable scanner

Imprimer la page

Scan Settings

Battery
Memory
High Resolution
Standard Resolution
Photocolor Mode
Docucolor Mode
Mono Mode
Scan Speed
As mentioned in the beginning of section (page 6) the DocuPen RC800 has two control
buttons and eight LEDs indicating the selected scan settings
By pushing the Power ON/OFF Resolution (Rez) button you can:
1.Turn scanner ON. The corresponding LEDs will light on, indicating the current scan
settings
2. Change between High Resolution and Standard Resolution setting
3. Turn scanner OFF - The DocuPen is designed to turn itself OFF automatically. You
can also turn it OFF manually by pushing and holding the button for 5 seconds
By pushing the Color Mode button you can switch between Mono, Docucolor
(Standard Color) and Photocolor setting
You have to start the scanning operation within a few seconds after turning the
DocuPen ON. If there is no manipulation, i.e. no movement or no setting-up of the
Scan mode, the scanner will turn itself OFF. You will need to turn it ON again.
Following on the next page you can see a detailed explanation of the different Scan
modes and the corresponding LED configurations.
Note:
For optimal scan quality and memory usage we recommend
scanning in Monomode in 200 dpi or 400 dpi and in Docu- and Photo-
color Modes in 100 or 200 dpi.
DocuPen Operation Manual 18
Color Mode
Power On/Resolution

LED Indicators

The 8 LED indicators at the top of the DocuPen from left to right indicate the following:
LED
Explanation
Scan speed indicator - if this LED blinks during scan operation, then
slow down.
Speed
This LED indicates that the scan will be performed in Monochrome or
Mono
Grayscale
mode.
Color
This LED indicates that the scan will be performed in Docucolor
Standard
(Standard) mode [12bit color]
Color
This LED indicates that the scan will be performed in Hi Quality
Photo
Photocolor mode [24bit color]
Color
This LED indicates that the scan will be performed in standard reso-
Standard
lution [100,200 dpi]
Rez
This LED indicates that the scan will be performed in high resolution.
High
[200,400 dpi]
Rez
This LED shows the available memory capacity. When it flashes in
Memory
Green 75-100%, Yellow/Orange 26-50%, Red <25% Free
This LED shows the available battery capacity on the pen When it
Battery
flashes in Green 75-100%, Yellow/Orange 26-50%, Red <25% Free
LED Combination
Scan Mode Explained
Monocolor Standard-rez Mode - Takes the least
amount of memory. Best suited for black & white docu-
ments, graphics or handwriting.
Monocolor Hi-rez Mode - Best suited for fine print
documents, lower quality faxes or when the result
needs to be printed out.
Docucolor Standard-rez Mode - Best suited for web-
view of color images (magazines, newspapers)
Docucolor Hi-rez Mode - Same as above but image is
in higher resolution and best suited for print.
Photocolor Standard-rez Mode - Best suited for web-
viewing and printing of high quality images
Photocolor Hi-rez Mode - Best suited for printing of
high quality images.(NOTE: The images scanned in
this mode are very large in size!)
DocuPen Operation Manual 19