DOD LS300W Manuel de l'utilisateur - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DOD LS300W. DOD LS300W 20 pages.
Également pour DOD LS300W : Manuel d'installation du matériel (2 pages)

Imprimer la page

INTRODUCTION OF OTHER FUNCTIONS

• Loop Recording (

Loop Recording can be set at 2/3/5 minutes, it means that the video clip intervals will

be set at 2/3/5 minutes long and after memory card is full, the oldest video clips will

be deleted and new video clips will take its place.

If Loop Recording is turned off, it will stop recording when the memory card is full.

• G-Sensor (default at Middle)

When the internal G-Sensor detects situations like an impact, intense bumps or hard

brakes during Recording Mode, the unit will automatically lock the current recording

to avoid being replaced by loop recording.

• Motion Detection

In Motion Detection Mode, the surrounding of where the car is parked will be

recorded taking the least amount of storage space. Recording will automatically be

turned off after 10 seconds if nothing happens during the monitor mode. Once there

is movement, the unit will start recording immediately.

* The Motion Detection Mode requires the camera to be connected to a constant

power supply.

When Motion Detection Mode is activated, Monitor Mode/Emergency Recording

Mode and the G-Sensor function will automatically be turned off.

• Plate Stamp

Enter your license plate number or desired input, and it will be displayed on the video

footage.

)

default