DOD FX 66 Flashback Fuzz Manuel rapide
Parcourez en ligne ou téléchargez le pdf Manuel rapide pour {nom_de_la_catégorie} DOD FX 66 Flashback Fuzz. DOD FX 66 Flashback Fuzz 2 pages.
Imprimer la page
What the FX66 Does
The FX66 is a distortion pedal reminiscent of the
old fuzzy faced distortions of the 60's.You'll feel like
you've had a flashback from the Monterey Pop
Festival just by connecting your guitar to the FX66
and playing.
Connecting The FX66
Connect your guitar to the input of the FX66.
Connect the output of the FX66 to the input of
your amplifier (or to the input of another effect
device you may be running).To eliminate the need
for a 9 volt battery, connect the PS200R to the AC
power jack on the FX66.
China
in
Printed
18-0066-01
FX66
notice.
without
change
to
subject
are
manual
this
in
specifications
Corp.
Electronics
DOD
1999
Copyright
568-7638
(801)
Fax
International
568-7642
(801)
Phone
International
566-7005
(801)
Fax
566-8800
(801)
Telephone
84070
UT
Sandy,
Parkway
Sandy
S.
8760
Corporation
Electronics
DOD
Features
• LED indicator shows status of effect and battery
condition.
• Active switching for noiseless operation.
• Easy access battery compartment.
• Adapter jack for AC operation.
• Rugged die-cast metal chassis.
• Three year limited warranty.
• Rubber non-skid bottom.
Controls
Volume - This knob adjusts the overall volume level
of the FX66.
Low - This knob adjusts the amount of low frequen-
cies in your guitar tone.
Tone - This knob adjusts the amount of high fre-
quencies in your guitar tone.
Fuzz - This knob adjusts the amount of distortion
produced.
Footswitch - Bypasses, and re-engages the distor-
tion.
LED Indicator - Lights when the distortion is active
and is not lit when the distortion is bypassed.
Jacks - Input, Output, AC adapter (use only the
PS200R).
USA
Office
or
Office
Service
and
Sales
DOD
local
USA
Engineering
Corporation
The
93/68/EEC.
89/336/EEC
Directive
EMC
the
and
72/23/EEC
Low
the
of
requirements
the
with
complies
Information:
(1991)
(1990)
3
2,
1,
amendments
with
(1985)
(1993)
Specifications:
Product
following
equivalent).
or
EN60742,
EN60065,
of
ments
require-
the
to
conforms
that
adapter
power
II
Class
a
with
and
power
battery
internal
includes
(includes
All
FX66
product:
USA
84070,
Utah
Sandy,
Parkway
Sandy
S.
8760
Corporation
Electronics
DOD
Conformity
of
Declaration
Operation of the FX66
The FX66 was designed to give you the vintage
sound typical of what bands in the 60's used. A few
simple knob adjustments and the groovy tones will
make you feel the flower power. You'll find yourself
saying "peace, love and rock & roll, man."
Start by adjusting the Volume knob to match the
level of the bypassed signal. Bypass the FX66 and lis-
ten to the volume level.Then engage the distortion
and turn the Volume knob until the level is relatively
the same.
Next, you'll want to tune in the amount of Fuzz that
you need. Rotate the Fuzz knob until you find that
psychedelic groove you're looking for.
Now use the Low control to adjust how heavy you
want the bass frequencies to be.
Finally, use the tone knob to give your guitar the
amount of high end edge that you want.
Don't be afraid to experiment with different knob
settings. After all, only you know the colors that you
want your music to show. It's now up to you to
"tune in, turn on and drop out."
568-7642
(801)
Fax:
568-7638
(801)
Tel:
84070,
Utah
Sandy,
to
due
warranty
this
Parkway
Sandy
S,
8760
or
damages
consequential
Sales
International
Your
Contact:
European
or
DOD
shall
event
no
1999
2,
March
connec-
in
liability
or
84070,
Utah
Sandy,
any
authorizes
nor
Parkway
Sandy
S.
8760
expressed
warranties,
of
President
Vice
Electronics
DOD
products
on
same
the
Directive
by
amended
as
Directive
Voltage
with-
product
this
upon
herewith
product
The
or
design
in
changes
Supplementary
55020
EN
of
burden
the
be
to
considered
55013
EN
EMC:
IEC65
60065
EN
Safety:
in
use
product's
the
of
the
to
Conforms
for
liable
be
not
shall
a
to
up
covered
be
original
the
through
returned
of
evidence
show
repairing
to
limited
Options:
Product
Name:
Product
workmanship
and
materials
the
that
declares
the
within
solely
used
Address:
ManufacturerÕs
warranty.
Name:
ManufacturerÕs
ten
within
mailed
be
Important Notes
• The FX66 battery is in use whenever you are
plugged into the INPUT jack.To extend the life of
the battery, be sure to disconnect the input when
the FX66 is not in use.
• Remove the battery when the FX66 will not be
used for an extended period of time.This will pre-
vent possible damage due to leaking battery fluids.
• Battery replacement is indicated when the FX66
fails to switch in and out, or when the LED stays
lit.
• Keeping the battery in the FX66 while using an AC
adapter will provide continuous operation in the
event of a power failure.
• Use of any power adapter other than the PS200R
will void the warranty of this product.
• No user serviceable parts inside. Removal of the
bottom plate will void the warranty of this prod-
uct. Should your FX66 require servicing, contact
your authorized DOD dealer for return/repair
information.
control.
their
beyond
causes
of
performance
the
in
delay
any
from
or
special
for
liable
be
dealers
its
In
product.
this
of
sale
the
with
tion
obligation
any
it
for
assume
to
person
assumes
neither
DOD
and
implied,
or
other
all
of
lieu
in
is
foregoing
6.The
manufactured.
previously
install
to
obligation
any
incurring
out
improvements
or
to
additions
make
make
to
right
the
reserves
DOD
5.
consumer.
the
is
date
Proof-of-purchase
4.
assembly.
or
circuit
any
result
a
as
damage
consequential
any
company
years.The
three
of
period
will
labor
and
parts
all
where
dealer,
is
product
the
provided
defect,
that
materials
defective
replacing
or
is
warranty
this
under
liability
DOD
3.
service.
and
use
normal
under
in
defects
from
free
be
to
U.S.,
when
product
this
warrants
DOD
2.
this
validate
to
date
purchase
of
days
must
card
registration
warranty
1.The
Warranty