DOD 410 SERIES II Manuel du propriétaire - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} DOD 410 SERIES II. DOD 410 SERIES II 13 pages. P.a./monitor processor

R410 Manual
6/8/99
10:41 AM

Rear Panel

1
2
3
BAL OUTPUT
BAL THRU OUTPUT
BAL / UNBAL
OUTPUT
1. Balanced Output -Accepts a female XLR plug (see section
on installation for wiring).
21dBu. Output impedance is 102Ω balanced.
2. Balanced/Unbalanced Output - Accepts a 1/4" tip-ring-
sleeve balanced or 1/4" unbalanced tip-sleeve plug (see section
on installation for wiring connections). Maximum output level
is 21dBu. Output impedance is 20kΩ for the unbalanced con-
nection and 40kΩ for balanced.
3. Balanced Thru Output - Accepts a female XLR plug (see
section on installation for wiring connections). This output is
hardwired to the input allowing the signal to be split off to
another destination. Balanced output is possible only with a
balanced input signal.
4. Balanced/Unbalanced Thru Output - Accepts a 1/4" tip-
ring-sleeve balanced phone plug or a 1/4" unbalanced tip-sleeve
plug (see section on installation for wiring connections).
5. Balanced Input - Accepts a male XLR plug (see section on
installation for wiring connections). Maximum allowable input
is 21dBu. Input impedance for the balanced connection is
102Ω.
6. Balanced/Unbalanced Input - Accepts a 1/4" tip-ring-sleeve
balanced phone plug or a 1/4" unbalanced tip-sleeve plug (see
section on installation for wiring connections). Maximum
allowable input is 21dBu . Input impedance is 51Ω for the
unbalanced connection and 102Ω for balanced .
Page 5
4
5
6
BAL INPUT
BAL / UNBAL
BAL / UNBAL
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK
THRU OUTPUT
INPUT
DO NOT REMOVE BACK. NO USER SERVICEABLE PARTS INSIDE.
USA
USA
MANUFACTURED IN THE
MANUFACTURED IN THE
BY
BY
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
SALT LAKE CITY, UTAH
SALT LAKE CITY, UTAH
WARNING:
AVIS:
RISQUE DE CHOC ÉLECTRIQUE-NE PAS OUVRIR
Maximum balanced output level is
5
117 V
50 / 60 Hz
18 WATTS
SHOCK HAZARD-DO NOT OPEN