Etac Molift Raiser Instructions de reconditionnement - Page 3
Parcourez en ligne ou téléchargez le pdf Instructions de reconditionnement pour {nom_de_la_catégorie} Etac Molift Raiser. Etac Molift Raiser 3 pages.
Également pour Etac Molift Raiser : Manuel (20 pages), Instruction sur le reconditionnement (5 pages)
Imprimer la page
Molift Raiser
Reconditioning instruction / Re-use
English
Molift Raiser can be reconditioned.
This reconditioning instruction is meant for the technician in charge of the reconditioning.
-
Use a solvent-free detergent with a pH level between
5 and 9.
-
Can be washed at 80° C for 3 minutes. (not with leg
support).
1
Check brake functionality
-
Parking brake
-
The wheels must lock in brake position.
-
The parking brake must stay in locked position.
-
Lubricate the brake mechanism.
2
-
Check the height controls and that the snap function
can lock in all positions
-
Check that the pad does not have any damage.
2
3
5
Leg Support
4
1
Washing
-
Use a wet wipe for the leg support.
-
Do not rinse directly on bearings and leg support with
a pressure washer.
3
-
Check that the base plate is secured and that it does
not have any damage.
4
-
Ensure that all ten screw mounts have tightened screws.
-
Ensure that the handle is not damaged and is properly
secured.
5
Castors / Wheels / Wheel axles
-
Check that the tyres, bearings and wheel axles are not
worn, and that the wheels turn easily.
Original spare parts from Etac should always be used.
2 (2)
Base plate
Handle