Fletcher-Terry Pneumatic FrameMaster Manuel de l'utilisateur - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Fletcher-Terry Pneumatic FrameMaster. Fletcher-Terry Pneumatic FrameMaster 10 pages.
Imprimer la pageneumatic FrameMaster®:
P
1. Connect the point driver to the air supply before loading points.
2. Lay the driver on a table, release the magazine latch and slide the
magazine cover fully open.
A
A
Figure 3
5. Push on the End Cap to close and latch the cover.
Pneumatic FlexiMaster®
1. Release the magazine latch and slide its cover all the way open.
2. Lay the driver down as shown in Figure 4.
3. Position a stack of Flexible Framer's Points with the pointed edge
away from the handle and the glue groove in the points facing
Figure 4
3.
Hold a full stack of Framer's
Points at an angle with the glue
side down, and the sharp end of
the points under the lip of the
magazine groove as shown at A
in Figure 3.
4.
Now lay the stack down so the
pointed ends of the stack
remain trapped under lip A in
the magazine groove.
toward you and lay the
stack down.
4. Push on the End Cap to
close and latch the
cover.
5