Clinton 253 Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Clinton 253. Clinton 253 8 pages. Power mat platform

FAQs

PROBLEM: Platform is squeaking.

SOLUTION: Lubricate the Platform at designated points using Molykote G-0052Fg grease.

See drawing below for lubrication locations.

PROBLEM: Platform height adjustment will not work properly.

SOLUTION: Make sure the platform is connected to a working electrical outlet. Inspect all power cords

for cuts or breaks that would interfere with the electrical connection. Check to make certain foot pedal

cord is properly and securely plugged into motor. If after checking all these areas, the platform will not

operate, or operates improperly, call a technician, or call Clinton Industries at 800-441-9131 for

assistance. NEVER USE THE PLATFORM IF IT IS NOT WORKING PROPERLY.

REMOVAL OF THE MOTOR FOR SERVICE

The motor assembly is located at the foot-end of the platform on the base. Raise the platform to its full

height and remove the screws holding the upper portion of the shroud lower the shroud. Next, detach

the motor

assembly. Using help, lower the table onto its side onto a protective surface such as a blanket or other

material that will not harm the upholstered top. Remove the foot pedal controller by unplugging the

DIN plug on the side of the motor. Carefully remove the upper and lower motor mount bolts to free the

motor assembly.

For assistance with other problems not covered in this guide, or questions about your

Clinton Power Mat Platform, please call Clinton Industries at 800-441-9131.

Upper Motor Mount

Motor Assembly

Lower Motor Mount

Foot Pedal DIN Plug