Dodge Quantis MSM Manuel d'instruction

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Dodge Quantis MSM. Dodge Quantis MSM 16 pages.

Imprimer la page

These instructions must be read thoroughly before installation or operation. This instruction manual was accurate at the time of

printing. Please see dodgeindustrial.com for updated instruction manuals.

WARNING: To ensure the drive is not unexpectedly started, turn

off and lock-out or tag power source before proceeding. Failure to

observe these precautions could result in bodily injury.

WARNING: All products over 25 kg (55 lbs) are noted on the shipping

package. Proper lifting practices are required for these products.

WARNING: High voltage and rotating parts can cause serious or fatal

injury and property damage. The use of electrical machinery, like all

other utilization of concentrated power and rotating equipment, can

be hazardous. Installation, operation and maintenance should be

performed only by qualified electrical and mechanical maintenance

personnel familiar with NEMA safety standards, the National

Electrical Code and sound local practices. The manual is to be

studied thoroughly by personnel responsible for the installation and

maintenance of this equipment before installation is begun. Personnel

must be familiar with the potential hazards involved. If this warning

is not observed, personal injury and/or property damage may result.

Keep this document for future reference.

WARNING: Depending on operating conditions, sound levels for

Quantis products may exceed 70 dB. Protective measures such as

hearing protection may be needed when in close proximity to a Quantis

Reducer in operation.

WARNING: Quantis products exceeding 30 lb (13.5 kg) should be lifted

using lift-assist equipment rated for the weight of the product. Weight

values for all Quantis products are listed in the Gearing Engineering

Catalog. Lifting brackets provided on Quantis should be used when

connecting to lift-assist equipment.

WARNING: Because of the possible danger to person(s) or property

from accidents which may result from the improper use of products,

it is important that correct procedures be followed. Products must be

used in accordance with the engineering information specified in the

catalog. Proper installation, maintenance and operation procedures

must be observed. The instructions in the instruction manuals must

be followed. Inspections should be made as necessary to assure

safe operation under prevailing conditions. Proper guards and other

suitable safety devices or procedures as may be desirable or as may

be specified in safety codes should be provided, and are neither

provided by Dodge nor are the responsibility of Dodge. This unit and

its associated equipment must be installed, adjusted and maintained

by qualified personnel who are familiar with the construction and

operation of all equipment in the system and the potential hazards

involved. When risk to persons or property may be involved, a holding

device must be an integral part of the driven equipment beyond the

speed reducer output shaft.

Quantis

MSM Reducer

Instruction Manual

Gearmotors

C-Face Reducers

Separates

Sizes 38–168

GENERAL

Please read these instructions carefully. They contain vital

information on proper installation, operation, maintenance and

service for the Dodge Quantis MSM gear reducer.

Each Dodge gear reducer is thoroughly inspected and tested at

the factory prior to shipment. Care is taken in packing of each

gear reducer. However, each gear reducer should be thoroughly

inspected before it is accepted from the transportation company.

If any of the goods called for in the bill of lading are damaged or

missing, do not accept the shipment until the freight agent makes

appropriate notation on your freight bill. If any loss or damage

is discovered later, notify the agent at once and request an

inspection. Though Dodge will be happy to assist you with claims

for loss or damage in shipment, the transportation company is

responsible for reimbursing you for such claims. Claims for loss

or damage in shipment must not be deducted from the Dodge

invoice, nor should payment of the Dodge invoice be withheld

awaiting claims adjustment. The carrier, not Dodge, guarantees

safe delivery. If considerable damage or shortage has occurred

and the situation is urgent, contact your local representative.

WARRANTY

NOTE: Service and repair under warranty should be

performed only by an Dodge Industrial Inc. Authorized

Service Shop. Contact Dodge Industrial Inc. Product

Support for Assistance.

The Dodge Quantis MSM is warranted under the Dodge

Industrial Inc. "Standard Terms and Conditions of Sale".

Warranty claims must be submitted to Dodge Industrial Inc.

within one year from the date of installation or within three

years from the date of manufacture, whichever comes first. The

warranty does not extend to failures induced by misuse, improper

storage or handling, abuse, or misapplication.