1010 Music Bitbox Manuel de démarrage rapide

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} 1010 Music Bitbox. 1010 Music Bitbox 2 pages.
Également pour 1010 Music Bitbox : Manuel de l'utilisateur (11 pages)

Imprimer la page

1010 Music Bitbox Manuel de démarrage rapide

First things first:

A microSD card must be

inserted into bitbox before

you can get started.

Load files from a microSD

card:

1. Insert the provided microSD

card into the MICRO SD

slot, notched edge down.

Clips are preloaded on the

card.

2. You will see the Main screen

with a grid of clips loaded

into individual cells of the

grid.

Play clips:

There are three ways to trigger

playback of a clip:

1. Touch a cell to play the

corresponding clip. The light

colored cells in the grid hold

clips. The name of the clip

appears in the cell after it is

loaded. Blank cells are empty.

2. Plug a trigger source into one of the CV Trigger jacks. The CV Trigger jacks are mapped to the clip cells on the

touchscreen. The clip that corresponds to the used CV Trigger jack will now be triggered by the CV Trigger input.

3. Plug a MIDI controller source into the MIDI input jack.

a) NOTE: The MIDI input uses a TRS connection compatible with the Arturia BeatStep Pro. Be sure to use a TRS cable.

The clips are triggered on channel 10, which is the drum part on the BeatStep Pro.

b) Bitbox maps MIDI inputs for notes 36 to 51 to the clips in the grid as shown in the table to the

right. The modulators are assigned notes 52 to 55 as shown. Learn more about modulators at

1010music.com/support.

Adjust the parameters of a clip loaded into a cell:

1. Touch the cell you want to modify on the touch screen. The cells that have clips loaded will have text labels.

2. Press the INFO button.

3. You will now see the

modify one of the parameters, turn the knob next to that parameter.

4. Touch the on-screen

HOME button to go back.

Synchronize clips with clocks:

1. Follow the steps above to set the Trigger and other parameters for the cell. Bitbox synchronizes clips when

Quant Size

is set to something other than

2. Plug a clock source into the CLOCK jack or a MIDI clock source into the MIDI jack. You should hear all clips

play synchronized with the input clock or MIDI signal, according to the parameters set up for each clip in the

prior step.

a) Note: The Clock input must use 4 pulses per quarter (PPQs), or a pulse per 16

3. If MIDI and Clock inputs are used together, Bitbox will select the highest priority clock based on the following

order of priority: 1.) Clock Input; 2.) MIDI Input; 3.) Internal Clock.

11/3/16 3:24 PM

Bitbox Quick Start Guide

HOME

Context

Sensitive

Control Knob 1

Controls

Control Knob 3

MIDI

CLOCK

IN1

IN2

Input Jacks

Start

Length

Trigger Mode

button, or press the INFO button again to see additional parameters. Press the

bitbox

Home button

Touch Screen

Memory Card Slot

MICRO

, and

Level

None

, such as

Quant Size: 1 bar

INFO

Control Knob 2

Control Knob 4

CV Triggers

CV Modulators

FX1

FX2

OUT1

OUT2

parameters on the touch screen. To

note.

Information button

Context

Sensitive

Controls

Output Jacks