Cyetus MF03 Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Cyetus MF03. Cyetus MF03 9 pages.

CLEANING AND CARE

1. NOTE: To reduce build-up of milk residue, always empty any residual milk and clean immediately after

frothing is convicted. Never leave liquid in the milk frother overnight.

2. Unplug the power base from the electrical outlet and let the milk frother cool down completely before

cleaning.

3. Clean the inside of the jug with a damp & soft cloth, or sponge. Only the whisk can be detached to rinse

with water.

4. If necessary, put on the whisk attachment to the whisk head. Fill clean water to MAX. level mark, then

add a couple drops of mild liquid soap. Turn the milk frother ON and allow the soapy water to clean the

jug. After the milk frother turns itself OFF, discard the soap water. Pour fresh clean water into the jug

and discard; repeat until soap residue is completely removed. Wipe out with damp cloth.

5. WARNING! Do not immerse the milk frother or the power base in water or any other liquid. Never place

the milk frother under running water to clean. Do not place in the dishwash en.

6. Make sure that all electrical connectors and sockets are kept dry.

7. Rinse lid and whisk in clean water and dry thoroughly.

8. Never use any solvents or abrasive cleaning agents, hard brushes, metal or sharp objects to clean. Solvents

are hazardous to health and harm the product5s plastic parts; abrasive cleaning agents and cleaning

accessories may scratch the product5s surfaces.

9. Any other servicing should be performed by an authorized service representative.

UNPACKING AND CHECKING THE PRODUCT

Remove the product and accessories carefully from their original packaging.

Check whether the contents of the packaging are complete or damaged. If the contents of the packing are

incomplete or if damage is detected, please return the product to us.

No Hazard! Keep packaging materials out of reach of young children.

INTENDED USE

1. This product is suitable for heating and frothing milk only. Any other use may result in damage to product

and/or injuries.

DRY PROTECTION

1. If there isn't sufficient milk in the milk frother, it will shut OFF automatically. Nevertheless, always ensure

that there is enough milk in the product, as switching the device OFF automatically can shorten its life

span.

2. Allow the product to cool down before filling it again.

STORAGE

1. Unplug the milk frother and allow it to cool.

2. Store in its box in a cool and dry place.

Never store the

appliance while it is still connected to mains power.

4. Never wrap cord tightly around the appliance.

5. Do not put any stress on the cord where it enters the appliance as it may cause the cord to fray and break.

Brand Owner：Shanghai Starship Electronic Commerce Co., Ltd.

Manufacturer：Ningbo Turando Electrical Appliances Co., Ltd.

358 Weisan Road, Andong Town, Hangzhou Bay New Zone, Ningbo, Zhejiang, China