CLIPS TECH NB-K2 Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} CLIPS TECH NB-K2. CLIPS TECH NB-K2 15 pages. Bluetooth stereo headset neckband

Imprimer la page

How to Set Pairing Mode (Initial registering of the device)

Every Bluetooth enabled device must be initiated by the customer. This means a

"pairing" procedure with the host device or smartphone is required. This requires a

PIN number or auto-pairing before the first time use of the product. Please refer to

this Quick Start Guide for pairing with smartphones.

1.Setting with pairing mode for the product (NB-K3)

Push the Power/Call button for more than 2 seconds from "the status of Power-

off". LED indicator will blink red and green together so as to turn on the pairing

mode. Initially the pairing mode setting was input to your device at the factory.*

LED OFF

(Power Off)

2. Searching for the product from device before connecting

Searching for the product from a paired device--The way search mode works may

differ for some devices, depending on manufacture. Please refer to the "Quick Start

Guide" or user manual of such devices.

3. Registering the product from the device before connecting

The product (NB-K3) will show up on the Bluetooth device, smartphone or PC. Just

select the product and register it. The LED indicator will turn green, blinking slowly

while it completes the pairing. After that, it will connect automatically and your

Neckband will be ready for use.

✻ This device will automatically pair with previously paired devices. For more details,

please check your smartphone user manual or contact your smartphone manufacturer.

QUICK START Guide

LED ON

(Red after Blue)

LED ON (Red ⟷ Green)

blinking at the same time

(Pairing Mode)