Cygnett CY2963CHCSA Manuel de l'utilisateur - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Cygnett CY2963CHCSA. Cygnett CY2963CHCSA 9 pages. Smart motion sensor
Imprimer la page
Select the Cygnett Smart Hub + IR Remote Control device in the Cygnett Smart app and select the '+'
6.
icon.
7.
Follow the in-app instructions. After your Smart Motion Sensor has been registered, give it a name through
its Settings, and tap Complete.
8.
Remove the first layer on the adhesive, revealing the adhesive surface.
9.
Install the Smart Motion Sensor in a convenient location that has a clean surface within 40m of your
Cygnett Smart Hub + IR Remote Control by firmly pressing and holding down for 30 seconds.
10. Your Smart Motion Sensor is now ready to be used.
For examples on where your can place your Smart Motion Sensor, please refer to the below.
*Cygnett Smart Hub + IR Remote Control is not included and is sold separately if the Smart Motion Sensor is
purchased separately from the Cygnett's Smart Home Starter Kit.
Maintenance & Disposal
Before any cleaning, remove your device from all power sources. To prevent any scratches from occurring, use a
soft dry cloth and do not use any cleaning agents.
This symbol on the product indicates that this product shall not be treated as household waste.
Instead, it shall be sent to the applicable collection point for the recycling of electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health. For more information about the recycling of
this product, please contact your local city office.
Smart Motion Sensor
User Manual
4 |
P a g e