Dog Runner Revolution Pro Manuel de l'utilisateur - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Dog Runner Revolution Pro. Dog Runner Revolution Pro 16 pages.
Imprimer la page
ASSEMBLY STEPS
Step 1.
Step 2.
Step 3.
Assemble front hooker rack set (B) onto
Frame (A) but not tighten , screw hooker
rack (front set) (B) tightly by hex screw (a)
and curved washer (d) as left figure
showing.
Assemble Reinforced front bar (C ) but not
tighten, screw tightly by hex screw, curved
washer and Nylock (b,d,e) as left figure
showing.
1. First step, insert control cables from bottom of
console tube (D) and pull out from top end, using the
hex screws (b) to fix console tube (D) on frame
firmly.
2. Attach uprights (n, c) on base frame, fix upright
with hex screws (a), washers (b) and truss hex
screws(c).
3. Assemble together, fasten the velcro strap on the
remote control
Note: Not tighten the screw at this moment