Cannondale MC500 Bulletin de service - Page 2
Parcourez en ligne ou téléchargez le pdf Bulletin de service pour {nom_de_la_catégorie} Cannondale MC500. Cannondale MC500 5 pages. Cannondale engine control unit service bulletin
![Cannondale MC500 Bulletin de service](/uploads/products/server2/953174/953174.jpg)
INSTRUCTIONS
NOTE :
Before
starting
this
recommend
that
you
Diagnostic Tool Manual (P/N 912-5001985) included
with kit (P/N 912-5001986). The manual contains
important background information and explanations
that will be helpful to know before you attempt this
simple, but very technical procedure. We also
recommend that the service technician performing
the work have moderate PC skills.
1. From the Windows START menu select
DealerCal.exe
from
Diagnostic and Maintenance program group.
The Cannondale Diagnostic Tool main menu
will open. See example below.
00200
00200,X440s,082801
2. Connect the data cable to the vehicle and PC.
See the Cannondale Diagnostic Tool Manual
for details.
3. Disconnect the vehicle starter
harness lead. The solenoid is mounted on the
inner side of the left engine rail just below the
fuel filter mount. In the illustration below, the
radiator is shown removed for clarity; the
SBM01_05.fm
© 2001 Cannondale Corporation - All Rights Reserved
procedure,
we
strongly
read
the
Cannondale
the
Cannondale
00200
solenoid
connector can be released easily using only
your finger tips.
DISCONNECT HERE
SOLENOID
4. Press the vehicle engine start button briefly.
This will activate the engine management
circuits. The green LED on the data cable
block should be lit. Look at the block to
confirm that it is on. If you read the
Cannondale Diagnostic Tool Manual, you
would have learned that this LED stays on
while the ECU is active and that the ECU
remains
active
for
communications are not occurring- then it
shuts down automatically. If the light goes out
anytime during this procedure, just press the
engine start button again to turn it on.
5. Click the OPEN Calibration file (saved)
button in the Cannondale Diagnostic Tool
main menu.
Then, select the file named 00202 located in
2
only
2
minutes
if