DOGA GX220P Manuel d'instruction - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} DOGA GX220P. DOGA GX220P 16 pages. 40 volts

10.3 Angle control & Auto reverse ( GXT____ )

Model : GXT150, GXT220, GXT450

One triggering by the lever can make 3 step operation sequence in a cycle

■

Start, Stop and Direction in a cycle

Step

Sequence

Rotating

Counterclockwise by F/R

direction

Screwdriver runs to the

target angle and stop. It

Activating

always stops at the set

torque, even it does not

reach the target angle.

Time setting

0 - 5 sec / 30 steps

- Screwdriver stops Immediately when the lever is released in any sequence.

- Sliding F/R switch works for

■

Operating (Work) mode

① Rotating direction (FOR-REV)

■

PROGRAM mode

① First run angle (Increase / Decrease) together with "First Run(Speed)" button

② Time (Increase / Decrease) together with "Stop(Reverse)" button

③ Rotation speed (Increase / Decrease) together with "Speed(First Run)" button

④ Reverse run angle (Increase / Decrease) together with "Reverse(Stop)" button

Instructions manual / GX Screwdrivers

first RUN

Clockwise or

switch

→

stop HOLD

Stop and hold for set time

0 - 5 sec / 12 steps

→

reverse RUN

Reverse

Rotate reverse until

releasing the lever or

stop at the target torque