Dogtra Dogtra 600M Manuel de paramétrage des codes - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de paramétrage des codes pour {nom_de_la_catégorie} Dogtra Dogtra 600M. Dogtra Dogtra 600M 2 pages.

1. Start with the receiver/collar turned off.

On the front of the transmitter there is a NICK/CONSTANT toggle switch.

Set this toggle switch on the "N" position to synchronize the transmitter with the BLACK

collar/receiver. Set the toggle switch on the "C" position to synchronize the transmitter with the

ORANGE collar/receiver.

2. Select the intensity level 0 with the intensity selection dial on top of the transmitter.

3. Place the red dot on the back of the transmitter against the red dot on the Black or Orange

collar/receiver. Hold the two red dots together for several seconds, until the green LED on the

receiver/collar starts to blink rapidly, and then separate the two red dots.

Hold the Black button and the Orange button on the left side of the transmitter

simultaneously down for 3 seconds or until the rapid green blink of the LED on the

receiver/collar resumes a slower pace. The code setting work is now completed

Dogtra-Europe

Immeuble Le Vauban

Parc d'activités de La Verrière

4 rue de Panicalé

78320 La Verrière, France

TEL: +33 (0) 130 62 65 65

FAX: +33 (0) 130 62 66 11

Code setting guide for Dogtra 600M / 602M

Black button and Orange button

on the left side of the transmitter

NICK/CONSTANT Toggle Switch

Intensity Selection Dial