Dogtra YS 600 Manuel du propriétaire - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Dogtra YS 600. Dogtra YS 600 17 pages.
Imprimer la page
- 1. Table of Contents
- 2. At a Glance
- 3. Main Features
- 4. Overview
- 5. How to Use the On/Off & Intensity Dial
- 6. The LED Indicator
- 7. Operating Modes
- 8. The Persistent Bark Indicator
- 9. Testing the YS600
- 10. Charging the Battery
- 11. Collar Fitting
- 12. Troubleshooting Guide
- 13. Warranty and Repair Information
How to Use the On/Off & Intensity Dial
- The On/Off Intensity Dial is used to turn the No Bark Collar
on/off and to select the stimulation intensity level.
- Set the dial to "." to turn off the No Bark Collar.
- Set the dial to "P" for non-stimulating vibration only mode.
- The No Bark Collar has stimulation levels 1 (lowest) through
10 (highest). Each stimulation level begins with a vibration and
is followed by the stimulation.
- Set the dial to "T" to test the No Bark Collar. See Testing the
YS600 on page 9 to check if your unit is working properly.
On/Off & Intensity Dial
NOTICE
When first using the YS600 No Bark Collar, it is recommended
to start at the lowest stimulation intensity level. If your dog
continues to bark, gradually increase the stimulation intensity
level. Closely monitor you dog's reaction to find the right
stimulation level for you dog.
6
•
P
1~10
T
Function
Power Off
Non-Stimulating Vibration
Stimulation Level
Test mode