Dogtra ARC Manuel du propriétaire - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Dogtra ARC. Dogtra ARC 16 pages. Handsfree kit
Également pour Dogtra ARC : Manuel du produit (14 pages), Manuel (12 pages)

Imprimer la page

12. How to use the test lamp

collar. Hold the two red dots together for a moment

indicator light will come on for a moment then blink once

every 4 seconds, showing that the collar is ready to use.

(If the indicator light is red, or if there is only 1 bar

showing on the battery icon on the LCD transmitter

screen, the unit needs to be charged.)

2. Place the test lamp, included in the package contents, on

the contact points as shown in the diagram.

3. Turn the transmitter on by pressing the blue button on the

right side of the transmitter until the LCD screen

illuminates. The LCD screen shows the amount of battery

life remaining and the LED blinks once every 4 seconds.

the intensity, the brighter the test lamp will be.

on the transmitter. It should light for as long as the button

collar will automatically stop stimulation if the constant

button is depressed for 12 seconds or longer.

6. Turn the Rheostat Intensity Dial on the transmitter

clockwise and then counterclockwise. The test lamp

should glow brighter with higher levels of stimulation and

dimmer with lower levels. When you change the intensity

dial, the number on the LCD screen will change as well.

causes the collar to vibrate for up to 12 seconds. The

collar will reactivate when you push the button again.

NOTE : The test lamp may not be visible if the intensity

level is set below level ten.