cymatic audio LR-16 Manuel du produit - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel du produit pour {nom_de_la_catégorie} cymatic audio LR-16. cymatic audio LR-16 20 pages. Line recorder 16 track digital direct-to-usb recorder 16x2 usb audio interface
Également pour cymatic audio LR-16 : Manuel de démarrage rapide (8 pages), Manuel de démarrage rapide (8 pages)

Imprimer la page

DIRECT TO USB RECORDING

8.1.

Turn on the device

Connect the LR-16 to the power supply and turn it on. After the start-up screen you will see the

following screen:

8.2.

Connect USB storage device

When a USB drive is attached to the front panel USB port, the attached drive is mounted and

then the LR-16 optimizes itself for reading and writing the drive. With large drives it may take

around half a minute to complete this process.

8.2.1.

Device Details

After the optimization process is concluded the device details are displayed.

PRODUCT MANUAL

DIRECT TO USB RECORDING

8.2.2. Wrong file system

The inserted drive needs to be formatted in the FAT32 format, in order to be suitable for Direct-

to-USB recording. If this is not the case, you are given the option to format the drive.

Please keep in mind that formatting the drive will erase all data currently residing on the drive.

Please see section "Format USB device"

8.2.3. Disk error

If the inserted drive is defective or not supported, the screen will show a "Disk Error".

If this occurs, please remove the device and refer to section 'USB Hard Drives vs. USB Flash

Drives'.

DIRECT TO USB RECORDING

PRODUCT MANUAL