Cloos Arc Flash 4 evo Manuel d'utilisation - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Cloos Arc Flash 4 evo. Cloos Arc Flash 4 evo 16 pages. Welding helmet
Également pour Cloos Arc Flash 4 evo : Mode d'emploi et liste des pièces détachées (20 pages)
Imprimer la page
2.4 Hazards
The warning and safety notices listed here and in the operations chapters
of these instructions must be observed in order to prevent potential harm
to health and hazardous situations.
Radiation
DANGER!
Ultraviolet and infrared radiation are released during welding. This can
cause a painful inflammation of the cornea and irreparable damage to the
lens of the eye leading to cataracts.
• Protect skin and particularly the eyes. Keep eye drops and skin cream
with a high sun protection factor available.
• Do not look directly at welding rays with unprotected eyes when the arc
strikes.
• Always use safety glasses according to DIN EN 166 and DIN EN 379 in
your welder's protective shield or helmet.
• Protect other persons in the vicinity of the welding area from UV rays
and spatter by suitable, non-flammable partition walls.
• Always wear safety glasses with side protection when you are in an
area where welding takes place or where slag is removed.
Allergic reaction
WARNING!
Materials that may get in contact with the wearers skin could cause Aller-
gic reactions to susceptible individuals.
• If the contact can´t be avoided, a talk to a doctor about using creams is
recommended to keep the skin safe.
7