ASGCO BC-2 Instructions d'installation, d'utilisation et d'entretien - Page 2
Parcourez en ligne ou téléchargez le pdf Instructions d'installation, d'utilisation et d'entretien pour {nom_de_la_catégorie} ASGCO BC-2. ASGCO BC-2 9 pages. With bolt-up tensioner system
Imprimer la page
SAFETY FIRST
Important
Safety
Notice
WARNING
Please completely read and understand these instructions before attempting the installation of the
belt cleaning system. Failure to do so could lead to serious injury and equipment damage.
Ensure that all controls and power sources to the conveyor system are properly disconnected and
locked out while installing, adjusting or maintaining the belt cleaning system. Never attempt any
installation, adjustment, or service procedure while the conveyor is in operation.
Ensure that all required safety equipment is on hand, such as a fire extinguisher and first-aid kit before
proceeding. Those who use and maintain the belt cleaning system must be properly trained in its
proper use, know of its dangers, and read and understand this entire manual before attempting to
install, operate, or service this device. Failure to observe all instructions could result in serious injury.
It is the owner's responsibility that the owner and each operator read and be familiar with this manual.
Please contact our ASGCO engineering Department at 1.800.344.4000 if you have further questions or
are unsure of these procedures.
Always observe the basic rules of safety when working
with any conveyor system. To avoid injury and equipment
damage, be sure that all controls to the conveyor are
locked out and the power source is disconnected at all
times during installation.