CYP CSC-5500 Manuel d'utilisation - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} CYP CSC-5500. CYP CSC-5500 20 pages. Multi input scaler
Imprimer la page
6.2 Rear Panel
1 2
3
IR IN
SERVICE
RS232
COAX
OUTPUT
HDMI 1
HDMI 2
4
1
IR IN:
Plug in the IR extender cable for IR signal receiving from the
included remote control.
2
SERVICE:
Reserved for factory use only.
3
RS-232:
Connect with PC/NB and use RS-232 command to control the
device.
4
OUTPUT:
HDMI 1 & 2: Connect to HDMI display or amplifier for video or video
and audio display.
COAX: Connect to active speaker or amplifier for audio output in
digital format.
When the input audio source signal is with bitstream format and
the audio source setting is at Auto, coaxial output will bypass the
input audio signal which may be 5.1CH or 7.1CH according to
audio input format.
AUDIO: Connect to active speaker or amplifier for audio output in
stereo format.
PC/HD: Connect to monitor/display for video output display. For
HD output,use D-Sub 9pin to 3 RCA adaptor cable for output HD
timing from 480p~1080p.
5
INPUT:
HDMI 1~3: Connect to HDMI source equipment such as Blu-ray/
DVD player for both video and audio signal sending.
PC 1~3: Connect with PC/NB source equipment for video signal
input with D-Sub 15pin cable.
L/R: Connect to source equipment's L/R output corresponding
tothe input jack below with 3.5Ø phone jack for audio signal
3
AUDIO
PC/HD
HDMI 1
HDMI 2
HDMI 3
AUDIO
PC 1
PC 2
PC 3
5
6
7
INPUT
R
L
CONTROL
POWER
DC 5V
Cr/Pr
Cb/Pb
Y
R
L
CV
8