CYP DCT-40 Manuel d'utilisation - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} CYP DCT-40. CYP DCT-40 13 pages. Digital to analog audio convertor with dsp function

Imprimer la page

6.3 SIDE PANEL

USB & LED: 1. FUNC: Used to change the info display mode. Two

modes are available.

a. Volume Mode:

The default state is volume mode. The output volume is adjustable

in this mode using the "-" and "+" buttons.

b. Input Sampling Frequency Detection Mode:

The input sampling frequency is indicated when in this mode. The

LED will flash green to indicate the currently detected sampling

rate. If no audio source is detected the frequency indicator will not

illuminate. After indicating the frequency information for 4 seconds

the mode will automatically return to Volume Mode.

IN: This button toggles between the coaxial and optical inputs.

A single button press switches between inputs. The default audio

input is coaxial.

"-" and "+": Press "-" or "+" to decrease or increase the output

audio volume from 0 dB to -50 dB. Each step of the volume

adjustment is in 1 dB increments.

FUNC.