CYP CMSI-4H4CV Manuel d'utilisation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} CYP CMSI-4H4CV. CYP CMSI-4H4CV 20 pages. Hdbaset 4x4/8x8 hdmi matrix over cat5e/6/7
Également pour CYP CMSI-4H4CV : Manuel d'utilisation (20 pages)

Imprimer la page

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

8X8 HDMI MATRIX over CAT5e/6 CMSI-8H8CV

LCM: Displays the setting information of each input and output

setting.

POWER: Press this button to power the device on/off. The LED will

illuminate green when the power is on, red when it is in 'Standby'

mode.

LOCK: Press this button to lock all the buttons on the panel; press

again to unlock. The LED will illuminate green when locked.

IR: IR Receiver window (accepts the remote control signal of this

device only) with IR frequency of 38kHz.

MENU: Press this button to access the LCM menu system, from

here EDID settings can be managed and IP system settings are

displayed.

1~8/A~H and OUT/IN: Press the OUT or IN button to select the

output or input mode and then press the required number button

to make the selection accordingly.

For example, if outputs A~D need to be set to input 1 and outputs

E~H need to be set to input 2, then the following sequence of

button presses need to be performed:

Press: OUTABCDIN1MENU,

and then press: OUTEFGHIN2MENU.

Note: If the MENU button is not pressed the selection will not be

changed.

3 3

POWER

LOCK

OUT