CYP CMSI-4H4CVL Manuel d'utilisation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} CYP CMSI-4H4CVL. CYP CMSI-4H4CVL 20 pages. Hdbaset 4×4 hdmi matrix over cat5e/6/7

Imprimer la page

6.2 Rear Panel

1
2
3
RS-232: Connect to a PC or control system with D-Sub 9-pin cable
1
for the transmission of RS-232 commands.
2
SERVICE: Manufacturer use only.
3
CONTROL: This port is the link for Telnet or Web GUI controls, connect
to an active Ethernet link with an RJ45 terminated cable (for further
details, please refer to section 6.8 & 6.9).
Warning: Please do not connect this port directly to the PC/Laptop as the
Telnet function will not work.
4
ALL IR OUT: Connect to the IR blaster for IR signal transmission to
the source side. Place the IR blaster in direct line-of-sight of the
equipment to be controlled for it will blaster out all signal received
from the IR IN at the receiver sides.
5
ALL IR IN: Connect to the IR extender for IR signal reception. Ensure
that remote being used is within the direct line-of-sight of the IR
extender for it will send out the signal to all receiver's IR OUT.
6
IR OUT 1~4: Connect to the IR blasters for IR signal transmission.
Place the IR blaster in direct line-of-sight of the equipment to be
controlled for it will blaster out the IR signal received from the
receiver side choosen by input selection.
7
IR IN 1~4: Connect to the IR extenders for IR signal reception. Ensure
that the remote being used is within the direct line-of-sight of the IR
extender for it will send out the IR signal to the selected receiver's
IR OUT.
8
CAT5e/6/7 OUT A~D: Connect from these CAT outputs to the CAT
input port of the receiver units with a single CAT5e/6/7 cable for HDMI
Audio/Video and IR/RS-232 control signal transmission.
9
HDMI IN 1~4: Connect to the HDMI input source devices such as a
DVD player or a Set-top Box with HDMI cable or DVI to HDMI cable.
10
DC 24V: Plug the 24 V DC power supply into the unit and connect the
adaptor to an AC outlet.
Warning: Please do not connect the CAT5e/6/7 cable into the
receiver's LAN port.
4
6
ALL
1
A
2
B
CAT5e/6 OUT
CAT5e/6 OUT
IR OUT
IR OUT
IR OUT
IR OUT
IR IN
IR IN
IR IN
IR IN
5
7
8
7
8
HDMI IN
1
2
3
4
9
6
3
C
4
D
GND
2
1
CAT5e/6 OUT
CAT5e/6 OUT
4
3
V+
GND
IR OUT
IR OUT
IR IN
IR IN
DC 24V
7
8
7
8
10
GND
+
V
4