CYP OR-HD88S Manuel d'utilisation - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} CYP OR-HD88S. CYP OR-HD88S 20 pages. 8 x 8 hdmi matrix
Également pour CYP OR-HD88S : Manuel d'utilisation (16 pages)

Imprimer la page
CYP OR-HD88S Manuel d'utilisation

6.2 Rear Panel

3
A
HDMI Out
1
HDMI In
1
2
3
4
1
CONTROL: This port is the link for Telnet control, connect to an active
Ethernet link with an RJ45 terminated cable (for further details, please
refer to sections 6.8 and 6.9).
Warning: Please do not connect this port directly to the PC/Laptop
as the Telnet function will not work.
2
RS-232: Connect to a PC or control system with D-Sub 9-pin cable for
the transmission of RS-232 commands.
3
IR IN: Connect to the supplied IR extenders for IR signal reception from
the remote control of the Matrix. Ensure that the remote is within the
direct line-of-sight of the IR extender when used.
4
SERVICE: Manufacturer use only.
5
HDMI OUT A~H: Connect to HDMI equipped TVs or monitors for
display of the HDMI input source signal.
6
HDMI IN 1~8: Connect to the HDMI input source devices such as a DVD
player or a Set-top Box with HDMI cable or DVI to HDMI cable..
7
DC 24V: Plug the 24 V DC power supply into the unit and connect the
adaptor to an AC outlet.
B
C
D
HDMI Out
HDMI Out
HDMI Out
2
3
4
HDMI In
HDMI In
HDMI In
5
E
F
G
HDMI Out
HDMI Out
HDMI Out
5
6
7
HDMI In
HDMI In
HDMI In
6
H
HDMI Out
GND
GND
V+
V+
V+
V+
3
3
4
4
1
1
2
2
GND
GND
GND
GND
8
DC 24V
HDMI In
7
4