Dolby Audio ZVOX SB380 Manuel de configuration et d'utilisation - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel de configuration et d'utilisation pour {nom_de_la_catégorie} Dolby Audio ZVOX SB380. Dolby Audio ZVOX SB380 12 pages.
Imprimer la page
Back of TV
A)
DIGITAL
AUDIO
OUT
(TV Port Example)
A) Optical port of TV set.
B) Input panel of ZVOX sound bar.
2. The Digital Optical Signal Cable
Most TVs have an optical digital output jack sometimes labelled "SPDIF or TOSLINK" located on the side or back
panel of the TV. (Picture A)
NOTE: Be aware the optical cable and jack are not exactly square. Similar to a puzzle piece; Position the
optical cable end so it matches the orientation of the optical jack, then push the cable into the jack. You should
hear and/or feel a "click" when the cable is correctly inserted into the optical jack.
Connect one end of the supplied optical signal cable to the TVs optical jack (A), then connect the opposite end
of the optical signal cable to the optical jack on the ZVOX speaker labelled Standard Optical digital input 1D). (B)
NOTE: If the TV does not have an optical connection or its too difficult you can also connect the ZVOX speaker
using one of the alternative setup options. This speaker is equiped with two optical input ports See instructions
B, C or D.
A
B)
INPUT
ACCUVOICE
MUTE
3. Disable TV's Sound & Turn On The ZVOX Speaker.
Tune your TV to a program, then use the original TV remote to access the TVs Home Menu -> Options or Settings
-> Sound or Audio -> Speaker List or Sound Out -> Select the Audio System, External Speaker, or Optical
Audio Out option. (Menu list varies based on TVs year and make, see TVs owners manual)
Note: Not all TVs list this adjustment choice, if your TV does not simply turn the main TV volume to zero and
continue using the ZVOX remote to control the volume.
Using the ZVOX SB380 remote, tap the POWER button to turn On the ZVOX speaker. You may hear sound if
not tap the INPUT button on the SB380 remote until "InId" appears on the face of the SB380. This indicates the
optical digital input has been selected.
You should be able to hear the ZVOX speakers sound, use the volume buttons on the ZVOX remote to set the
volume to your preferred level.
POWER
SURROUND
VOLUME