Ashdown 60 Amplifier Head Manuel d'utilisation - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Ashdown 60 Amplifier Head. Ashdown 60 Amplifier Head 13 pages. Kidd combos peacemaker 20, 40 and 60 combos & 60 amplifier head, peacemaker 50 and 100 hand-wired amplifier heads
Imprimer la page
Fro nt Panel Facilities
KIDD G-1508, G-2008 COMBO
KIDD G-1508 Combo
KIDD G-2008 Combo
G-1508
INPUT
The sensitivity of the single jack instrument input socket has been designed to suit passive guitars such as a
standard Strat.This also has sufficient headroom to cope with double humbucker and active guitars.
GAIN
Settings of the GAIN control between zero and 12 o'clock are intended to provide a clean guitar signal
through this channel. Settings from 12 o'clock onwards will start to add a slight edge to the sound,
progressing through to a definite crunch as the control is advanced to its maximum setting.The actual
settings for this control will depend very much on the output level of the guitar being used.
VOLUME
This sets the overall volume level of the amplifier.
REVERB
This sets the overall level of reverb added to the channel.
TREBLE, MIDDLE, BASS
The Treble, Middle and Bass tone controls are a traditional passive guitar tone circuit and as such are an
interactive set of tone controls.This type of circuit provides the best overall character for the guitar, giving
a classic, vintage, full-bodied guitar tone.
PHONE
This jack socket is provided for headphone input to allow private practise.When this socket is in use, the
output from the amplifier to the speaker is cut.
POWER
This is the main power switch for turning ON/OFF the power from the mains inlet socket to the amplifier.
G-2008
INPUT
The sensitivity of the single jack instrument input socket has been designed to suit passive guitars such as a
standard Strat.This also has sufficient headroom to cope with double humbucker and active guitars.
CLEAN CHANNEL
VOLUME
This sets the overall volume level of the CLEAN channel.
TREBLE, BASS
The Treble and Bass tone controls are a traditional passive guitar tone circuit and as such are an interactive
set of tone controls.This type of circuit provides the best overall character for the guitar, giving a classic,
vintage, full-bodied guitar tone.
TUBE DRIVE CHANNEL
GAIN
Settings of the GAIN control between zero and 12 o'clock are intended to provide a clean guitar signal
through this channel. Settings from 12 o'clock onwards will start to add a slight edge to the sound,
progressing through to a definite crunch as the control is advanced to its maximum setting.The actual
settings for this control will depend very much on the output level of the guitar being used.
CONTOUR
This control allows sophisticated control over the shape of the Eq applied to the channel.
TREBLE, BASS
The Treble and Bass tone controls are a traditional passive guitar tone circuit and as such are an interactive
set of tone controls.This type of circuit provides the best overall character for the guitar, giving a classic,
vintage, full-bodied guitar tone.
CHANNEL SELECT
This switch allows the user to select between CLEAN and TUBE DRIVE channels.
VOLUME
This sets the overall volume level of the TUBE DRIVE channel.
REVERB
This sets the overall level of reverb added to the selected channel.
PHONE
This jack socket is provided for headphone input to allow private practise.When this socket is in use, the
output from the amplifier to the speaker is cut.
POWER
This is the main power switch for turning ON/OFF the power from the mains inlet socket to the amplifier.