Dolby Laboratories DP591 Manuel de démarrage rapide - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Dolby Laboratories DP591. Dolby Laboratories DP591 9 pages. Object authoring tool
Également pour Dolby Laboratories DP591 : Manuel de démarrage rapide (19 pages)
Imprimer la page
Item Interface
1
Input LED
2
Audio LED
3
Sync LED
4
Error LED
5
Control screen
6
Navigation keys
7
Volume control knob
8
Headphone jack
9
Dim button
10
Two USB 2.0 ports
11
Power button
12
Reset button
13
Over-temperature
indicator
14
Power supply failure
indicator
Dolby DP591 Audio Encoder Quick Start Guide
20 August 2018
Description
•
Green: Active signal on the selected input.
•
Red: No active input signal.
•
Off: No encoding mode selected.
•
Green: Audio data is detected on the input.
•
Red: Whenever a cyclic redundancy check (CRC) error is detected, the LED
is on for five seconds.
•
Off: No audio data is detected on the input.
•
Green: The device is synchronized to the primary clock source.
•
Yellow: The device is synchronized to a secondary clock source.
•
Off: The device is not synchronized.
•
Not used.
•
Displays the input type and the encoding mode.
•
From the menu, you can set/view device IP addresses.
•
Used to navigate through the device menu and to set the device IP
addresses.
•
Not used.
•
Not used.
•
Not used.
•
Used to load firmware upgrades.
•
Powers up the unit. Use at the end of the initial installation, and for
shutting down or power cycling the device.
•
Short press: The OS shuts down correctly, closing processes and
saving open files.
•
Long press: Forces power down of the system. Nothing is saved, and
data may be lost.
•
Physical reset of the device. No data is saved.
•
Solid red: Indicates that the unit temperature is higher than the
recommended range for safe operation. Ensure that the unit front and
rear air vents are not blocked, and that the ambient room temperature
meets device environmental specifications.
•
Flashing red: Indicates fan failure.
•
Red: Indicates that one of the power supplies has failed, or is
disconnected from the power mains.
DP591 front panel
2