CYP CH-506RXPLBD Manuel d'utilisation - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} CYP CH-506RXPLBD. CYP CH-506RXPLBD 16 pages. Hdmi to cat5e/6/7 extender
Imprimer la page
8
HDMI In
Connect with source equipment such as DVD/Blu-ray player.
6.2 Receiver Front and Rear Panels
Power
Link
1
2
3
1
DC 24V
Plug the 24V DC power supply into the unit and connect the
adaptor to an AC outlet. Only 1 side of device require power
supply when both Transmitter and Receiver obtain PoC function.
2
LINK LED
This LED will illuminate when the devices are connected with
a CAT5e/6/7 cable from the transmitter side. When the data
Transmission accrue with error the LED will be blinking.
3
Power LED
This LED will illuminate when the device is connected from the
transmitter with power supply.
4
CAT5e/6 In
Connect to the Transmitter unit with a single CAT5e/6/7 cable for
transmission of all data signals.
5
RS232 Out
Plug the 3.5Ø to D-Sub 9-pin male cable included in the package
and connect to the device that is to be controlled by RS-232
commands
6
IR1 Extender
Connect to the supplied IR Extender cable for IR signal reception.
Ensure that remote being used is within the direct line-of-sight of
the IR Extender.
7
IR2 Blaster
Plug the IR Blaster included in the package for IR signal sending
from the Receiver side.
CAT 5e /6/7 In
4
IR1 Extender
RS-232 Out
IR2 Blaster
5
6
HDMI Out
Receiver
7
8
4