CYP PU-506-KIT Manuel d'utilisation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} CYP PU-506-KIT. CYP PU-506-KIT 16 pages. 3-play hdbaset extender kit (2-way ir, rs-232 & hdmi, up to 100m)
Également pour CYP PU-506-KIT : Manuel d'utilisation (16 pages)

Imprimer la page
CYP PU-506-KIT Manuel d'utilisation

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Transmitter Front and Rear Panels

Front
IR2 Extender
RS232 In
IR1 Blaster
1
2
1
RS232 In: Connect to a PC/laptop or RS-232 enabled device (with
supplied 3.5 mm mini-jack to D-sub 9-pin adaptor) for the transmission
of RS-232 commands.
2
IR2 Extender: Connect to the supplied IR extender cable for IR signal
reception. Ensure that remote control being used is within the direct
line-of-sight of the IR extender.
3
IR1 Blaster: Connect to the supplied IR blaster cable for IR signal
transmission. Place the IR blaster in direct line-of-sight of the
equipment to be controlled.
4
HDMI In: Connect to the HDMI source equipment such as a DVD or
Blu-ray player.
5
DC 5V: Connect the 5 V DC power supply to the unit and plug the
adaptor into an AC outlet.
6
Link LED: The yellow LED will illuminate when both the input and
output CAT5e/6/7 signals are connected.
7
Power LED: This green LED will illuminate when the device is
connected to a power supply.
8
CAT5e/6 Out: Connect to the receiver unit with a single CAT5e/6/7
cable for transmission of all data signals.
8
HDMI In
3
4
Rear
7
DC 5V
Power
Link
CAT 5e /6 Out
5
6
8