Ashford Jack Loom Manuel d'instructions - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Ashford Jack Loom. Ashford Jack Loom 16 pages.

There are 5 warp sticks included with your Jack Loom.

FRONT ROLLER

To attach a warp stick to the front roller, thread 1 Texsolv cord

through the first hole in the warp stick and back through the

second to end hole in the cord.

Then take the long end of the cord through the small hole in

the warp roller and out the large hole. Then push a Texsolv peg

through the cord. The peg pulls down flat into the large hole.

Repeat for all holes.

Warping

For warping instructions please refer to our Jack Loom

Warping video on our website www.ashford.co.nz

BACK ROLLER

Thread 1 Texsolv cord through the first hole in the warp

stick and back through the 8th hole leaving approx. 10cm of

Texsolv cord.

Then take the long end of the cord through the small hole in

the warp roller and out the large hole. Then push a texsolv peg

through the cord. The peg pulls down flat into the large hole.

Use the third warp stick for your end warp stick (refer to warp

instructions) and attach to the end of the Texsolv cord with a

Texsolv peg through the 6th hole.

Repeat for all holes.