CYP CLUX-8M Manuel d'utilisation - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} CYP CLUX-8M. CYP CLUX-8M 8 pages. 1x8 hdmi 1.3 with multi-channel splitter
Imprimer la page
3.2 Rear Panel
HDMI OUT
EDID
STD
TV
2
1
1
EDID Control switch: Default factory setting is TV, leave as is if the display
is properly. Switch to STD to use build-in EDID if the display has problems.
When the EDID control switch in TV selection, the unit will detect the first
HDMI output source's EDID and record in the unit. If the first detected
output source is DVI it will pass to next source, until the first HDMI been
detected
Note: EDID Control switch will be valid when re-power on the unit.
2
HDMI Outputs 2~6: Connect each of the output ports to the HDMI
display. When more than one output connected, the HDMI outputs play
identical video signal simultaneously.
3
System Reset: Switch to "ON" stage, the system will send the internal
CEC Command to the display within 8~10 minutes to force all the
displays switch to HDMI 1 port. Meanwhile, the source CEC Command
will not functional to the system. When switch to "OFF" stage, the system
reset function will terminate.
HDMI OUT
HDMI OUT
3
2
HDMI OUT
4
5
3
HDMI OUT
SYS.Reset
ON
OFF
6
3