Ashford TABLE LOOM - SIXTEEN SHAFT Manuel d'instructions - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Ashford TABLE LOOM - SIXTEEN SHAFT. Ashford TABLE LOOM - SIXTEEN SHAFT 15 pages. 610mm (24in)
Imprimer la page
Attach the 4 pawls to the loom sides with 30mm (1¼") machine screws.
Note: The "clicker pin" fits into
the gap in the pawl. Take care
to ensure the "clicker pin"
does not damage your table.
Rub a little candle wax on the
thread of the screws to make
assembly easier. Leave 0.5mm
(1/32") gap under the head of
the bolt. DON'T over tighten.
The pawl should move freely.
Rub candle wax on the dowel ends of the rollers. Place the rollers into the holes in the loom sides. Attach the
front and back beams to the sides with 50mm (2") screws. Check the round edge of the beams face out.