CYP CPRO-U8T Manuel d'utilisation - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} CYP CPRO-U8T. CYP CPRO-U8T 12 pages. 1 by 8 4k uhd hdmi splitter
Également pour CYP CPRO-U8T : Manuel d'utilisation (12 pages), Manuel d'utilisation (16 pages)
Imprimer la page
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER
1
2
1
1
POWER: This LED will illuminate when the device is connected to an
active power supply.
2
OUT LED 1~8: When output detected, the LED will illuminate, and
when output is not connected, the LED will off.
IN: When input detected, the LED will illuminate. When input is not
3
connected, the LED light will be off.
4
SYS-RST: Switch the dip switch from off to on, the unit will trigger
TV to its HDMI input immediately, when stays in on, the unit will
trigger the system in every 8~10 minutes. (*The purpose of reset is
to guarantee all outputs are displaying the corresponding image.
For example, at the display side user may switch to different HDMI
input or select other sources and this reset function will force the
display to switch back to its HDMI input. TV/displays shall support
CEC function in order to perform this function successfully.)
5
EDID: Switch the dip switch to choose EDID mode to Standard
(STD) or TV mode. When on TV mode, the unit will automatically
detect and store output 1 sink EDID data. Switch to STD mode and
reboot the unit, the unit will search the suitable resolution out of
all connected display with video standard at 1080p and audio
standard at LPCM 2 channel.
6
SERVICE: This is reserved for firmware update use only.
3
OUT
IN
3
4
5
2
3
OUT
6
7
8
2
EDID
SYS-RST
SERVICE
STD
TV
ON
OFF
4
5
6