Cypress MB91460 Manuel - Page 14
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Cypress MB91460. Cypress MB91460 20 pages.
Imprimer la pageTable 8. Jumper and switches on SK91461 for SWB Monitor Debugger
RES
P15_3
P15_2
INT0
MD0
MD1
MD2
MD3
P21_0
P21_1
P15_3
P15_2
To start debug session connect UART0 via crossed serial cable to your PC's COM port and double-click the
appropriate debug configuration (Mondeb_57K6_COM1/COM2.sup).
A procedure file is executed to run through the startup file of the user project without overwriting important settings
like internal clocks or chip select settings. Procedure file stops at main()-function.
You can start debugging step-by-step or run up to a breakpoint. Do not use the 'Stop Execution' button in Softune
Workbench! Set INT0 switch on starterkit to H to stop program execution.
See also application Note
monitor debugger features.
5
Accemic MDE Monitor Debugger
This chapter describes the debugging on MB91461 by use of the Accemic MDE Monitor Debugger.
The Accemic MDE Monitor Debugger is a third party tool for debugging the MB91461R. It provides an own IDE
surface for debugging.
To use the Accemic MDE you have to add two files delivered with the MDE environment (monitorFR.asm, monitor.h)
to your Softune Workbench project (STANDALONE configuration). Also take care not to locate your project sections
overlapped with MDE sections.
Accemic MDE needs following address ranges:
S_Addr. -E_Addr.
0003FF00-0003FFFF
000FFB00-000FFBFF
007E0000-007EFFFF
Because normally the Accemic MDE handles clock startup, please remove clock setting section for startup. All clock
settings will be made to monitor kernel.
After you have build your project with the settings mentioned above, please check settings on starter kit shown below
and start Accemic MDE software.
www.cypress.com
Name (Switches)
Name (Jumpers)
"AN205205 - FR Family MB91460, SWB Monitor
Size
Section Type Al
00000100
DATA
N RW-- 00 ABS
00000100
CONST N R--I 00 ABS
00010000
CONST N R--I 00 ABS
Document No. 002-05206 Rev. *C
FR Family MB91460 Series MB91461R Emulation
Setting
BRK
Don't care
Don't care
L
H
L
L
L
Setting
Connection
Connection
Don't care
Don't care
Debugger" for more information on the
Sec.(Top 81)
ACC_MDATA
ACC_UDATA
ACC_MCODE
13