Cloud BT-1AEW Manuel d'installation - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Cloud BT-1AEW. Cloud BT-1AEW 16 pages. Bt-i series bluetooth wireless audio module

Imprimer la page

Set-up Options

Setting up the BT-1 is very simple: there are two 4-way DIP switches on the lower rear PCB which may need to be set to
configure the BT-1 to suit the specifics of the installation.
SECURE/
RF POWER
BLUETOOTH
NON-SECURE
LEVEL
IDENT
MODE
1
2
3
4
1
2
3
4
ON
ON
DIP switches shown with factory default settings
(Sketch simplified; only primary components shown,
BT-1F shown as example)

Secured and non-secured modes

Normal operation of the BT-1 will be with "Secured" mode selected: this requires the user to press the PUSH-TO-PAIR
button to place the module into "Awaiting Pairing" mode, and then to initiate pairing from his/her portable wireless device
within 30 seconds.
Under some circumstances, it might be preferable to select "Non-secured" mode to circumvent use of the PUSH-TO-PAIR
button, giving any user within range the ability to connect to the BT-1.
"Secured" mode is selected by setting SW1 of the left-hand DIP switch (as seen from the rear of the BT-1) to ON (switch
down). With SW1 OFF, the BT-1 is in "Non-secured" mode.
12
BT-1 Installation Guide v1.0