Ashly mXa-1502 Instructions de mise à jour - Page 2

Parcourez en ligne ou téléchargez le pdf Instructions de mise à jour pour {nom_de_la_catégorie} Ashly mXa-1502. Ashly mXa-1502 2 pages.
Également pour Ashly mXa-1502 : Instructions pour la mise à jour du micrologiciel (2 pages)

Imprimer la page

Ashly mXa-1502 Instructions de mise à jour

4) Double-click on the resulting <index.html> file to launch the software.

5) Log in to AquaControl software. Enter your username and password and press the Log In button. If this is the first log-in

to a new unit, use the factory default credentials "admin" for login name and "secret" for password.

iOS

1) Use a network device discovery app such as "Flame®" to see all available network devices.

2) Find the mXa-1502 in the list. Its MAC address gets added to the end of its name.

3) Tap on the mXa-1502 device to launch the software. Depending on the app used, additional address or type lines may

need to be entered before the software will launch.

4) Log in to AquaControl software. Enter your username and password, then tap the Log In button. If this is the first log-in to

a new unit, use the factory default credentials "admin" for login name and "secret" for password.

Android®:

1) Install an Android application that can discover Network Plug'n'Play devices. There are several apps that can do this. For

example, "UPnP Tool" is a free discovery app available on the Google Play Store.

2) Launch the UPnP Tool or other network discovery application and it will provide a list of all Plug'n'Play devices on your

network. You should see the MXA1502 listed, with its MAC address added to the end of its name.

3) Click on the (info) information icon, ("i" in a circle), to the right of the item to bring up the details of the product. Then

click on the <presentationURL> link or the <IP address> link to launch AquaControl. Your default browser will launch and

connect to the device. If this is the first log-in to a new unit, use the factory default credentials.

► What to do if network discovery fails

1) If using a wired DHCP network connection, and your mXa-1502 still does not appear on the computer's network device

list, it may be necessary to disable WiFi on your PC or MAC before initial discovery, and also confirm the computer is truly set

for automatic configuration (DHCP).

2) Alternatively, try entering the mXa-1502's unique hostname address in your web browser address bar. The format is:

http://MXA1502_(your mac address).local/

Here is a complete example of a unique hostname address: http://MXA1502_0014AAF00036.local/

DHCP and Static IP:

address to the mXa-1502 after the IP lease time expires, or whenever the mXa-1502 is rebooted. This could require you to

rediscover the mXa-1502 any time its IP address gets reset by the router or computer. To avoid future discovery steps on

device reboot, you can assign a Static (permanent) IP address to the mXa-1502 as shown below:

To assign static IP from AquaControl software:

[Manual Configuration]. Save your settings and note the IP address for future use. Important: If you are using a router, a static

IP address reservation for the mXa-1502 must also be entered in your router's IP administration settings. Once the mXa-

1502 has been assigned a static IP address, the address can be entered into the browser address bar to connect directly to

AquaControl. Important: You must use an IP address with the same subnet as your router and computing device. The subnet

is the first three sections of the IP address. For example, 192.168.1 is the subnet section of IP address 192.168.1.100. Tip:

The easiest thing to do is use the IP address that was automatically assigned to the mXa-1502 by the router/DHCP server.

► Firmware Update Instructions

The mXa-1502 continues to be enhanced. In order to get the most from your new mXa-1502,

please verify your current firmware and update as necessary. There is no automatic update feature.

1) After completing Network Discovery and launching the software, check the installed firmware version by going to the main

software Dashboard page. The firmware version is found under the Device heading.

2) Go to ashly.com/mxa1502 downloads section and check for the latest firmware version. If a higher version is available on

the Ashly website than the version installed on your unit, click the link and download the new mXa-1502 [*.bin] file.

3) To update firmware, go to the [Settings > General Settings] page, then click the "Update" button next to the current

firmware revision text. Click the [+ Firmware File] to browse for the firmware file you just downloaded. Finally, click [Install

Update] to begin the update process. The update may take up to 10 minutes to complete and will confirm when finished. Do

not remove power from the unit during the update process.

All features, specifications, and graphical representations are subject to change or improvement without notice.

Printed in USA

mXa-1502 v30m01580 (MA-00067) r8 10-20

The DHCP server (router), or direct-connected computer may arbitrarily re-assign a new IP

All trademarks referred to herein are the property of their respective owners

Go to [Settings>Network>Network Configuration] and select