Cypress CP-255H Manuel d'utilisation - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Cypress CP-255H. Cypress CP-255H 12 pages. Pc/hd to 1080p hdmi scaler box video scaler
Également pour Cypress CP-255H : Manuel d'utilisation (11 pages), Manuel d'utilisation (16 pages)
Imprimer la page
(4).Operation Controls and Functions
Front Panel
1. Power: Press the button to turn ON or turn OFF (standby) the power of the unit.
2. +/- button: The buttons provide 3 functions:
a. Input select ("+"): Press the "+" button repeatedly to select your desired input
source. The input sources are toggled through in the following sequence.
b. Auto Tune ("-"): Press the "-" button to carry out picture auto adjust for
analog inputs (component or PC). The CP-255H will fine tune the position
(centering) and color of the output picture.
c. When in the OSD menu mode: Press the +, - button to move up or down the
highlight bar to your desired parameter. Or once a parameter is selected
with MENU/Enter button, press the button to adjust setting value of your
selected parameter.
3. Menu/Enter: This button serves two purposes.
a. Press the button to bring up OSD main menu as shown in the
"OSD Operation". (page 7)
b. To act as a "Enter" key to enter sub menu or to adjust setting value of the
selected parameter.
4. Input LED Indicators: When one of the LED illuminates its corresponding source
5. IR Sensor: Infrad remote control sensor.
6. Audio L/R Input: Stereo audio input associated with component in.
7. Component Input: Connects this input connector to the Component output
connector of your source equipment using the enclosed 3RCA to 3RCA cable.
The CP-255H accepts both interlaced component input (480i, 576i) and
deinterlaced progressive input (480p, 576p...1080p).
The input range is 480i, 570i~1080i, 1080p.
Rear Panel
1. PC in: Connects this PC input connector to the VGA output of your PC.
The acceptable PC resolutions range from VGA~WUXGA.
2. PC audio in: Stereo audio input associated with PC in via 3.5mm phone jack.
INPUT
Cr/Pr
Cb/Pb
Y/HD
L
7
HD (component)
is being selected as input.
HDMI OUT
DC 5V
6
5
HD
PC
R
6
5
4
PC
HDMI IN
AUX
AUDIO IN
4
3
2
MENU
AUTO
INPUT
POWER
ADJUST
HDMI
+
ENTER -
3
2
1
HDMI
PC
PC IN
AUDIO IN
2
1