Ashly Protea NE8250.25 Manuel d'utilisation - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Ashly Protea NE8250.25. Ashly Protea NE8250.25 16 pages. Network enabled multi-channel power amplifiers
Également pour Ashly Protea NE8250.25 : Manuel d'utilisation (16 pages), Spécifications (2 pages), Fiche technique (2 pages), Manuel d'utilisation (16 pages), Manuel d'utilisation (16 pages), Manuel d'utilisation (20 pages), Manuel d'utilisation (20 pages)

Operating Manual - NE Multi Channel Power Amplifier

WR-1 Remote Level Control - The WR-1 is a dual potentiometer remote volume control designed to fit in a standard

wall electrical box, and is wired to the amplifier (with or without DSP installed) back panel Euroblock connector labeled

"Remote Level Control" using four conductor wire. If wiring a custom potentiometer assembly other than the WR-1, connect

+5V from the Remote Level Control Euroblock connector to the potentiometer's CW pin, GND to the CCW pin, and the channel

under control to the wiper. Do not connect the WR-1 remote level control ground to any other external grounds.

WR-2 Remote Preset Recall Switches - The WR-2 al-

lows selection of one of four presets via interlocking pushbutton

switches. Each pushbutton switch can be connected to a Preset

Recall Pin on the back panel of the amplifier. The terminal num-

bers correspond to the first 4 Preset Memory locations in the

controlled amplifier. Pressing a button will select the correspond-

ing preset. Windows are provided by each switch for a user-

generated label.