Cypress CE66058 Manuel - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Cypress CE66058. Cypress CE66058 14 pages. Dynamically switch csd bleed resistor
Imprimer la page
To read the raw count, baseline, and difference count of BTN4, proceed as follows:
1.
Place the cursor on the command line W 04 00 04 and click on send button once to send the I
2.
Place the cursor on the command line R 04 @Sensor_Index @1RawCount @0RawCount @1Baseline @0Baseline
@1DiffCount @0DiffCount @ButtonStatus and click on the Repeat button to send I
3.
Click the Chart tab to view the raw count, baseline, and difference count of BTN4, as shown in
As shown in the BCP chart, the raw count is now calibrated to about 70 percent of the maximum value:
Button 4 raw count with single Rb (Rb1) in CSD design = 2047 (49 percent of maximum value)
Button 4 raw count with separate Rb (Rb2) in CSD design = 2844 (70 percent of maximum value)
www.cypress.com
Figure 9. Command Editor Window in Bridge Control Panel
Figure 10. Chart Tab in Bridge Control Panel
Document No. 001-66058 Rev.*E
Dynamically Switch CSD Bleed Resistor
2
C write instruction.
2
C read instruction continuously:
Figure
10.
10