Ashly MQX-1310 Manuel d'utilisation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Ashly MQX-1310. Ashly MQX-1310 16 pages. Graphic equalizer
Également pour Ashly MQX-1310 : Brochure (1 pages), Notes techniques et spécifications (2 pages)

Ashly MQX-1310 Manuel d'utilisation
Operating Manual - MQX-2310, MQX-1310, and MQX-2150 Graphic Equalizer
3.15K 4K
5K
6.3K
8K
10K 12.5K 16K
3.15K 4K
5K
6.3K
8K
10K 12.5K 16K
5.5 High-Pass Filter
The high-pass filter can be used to supplement
the frequency response achieved by the bandpass filters.
It's function is to "roll off" low end response to eliminate
subsonic interference like wind noise, floor rumble, and
boomy microphone pops. The high-pass frequency on
the 31-band models is fixed at 40Hz with an 18dB/octave
slope. The MQX-2150 has an internally switched 20Hz
high-pass filter which can be disabled by a qualified ser-
vice technician.

5.6 Signal Present Indicator

A green LED indicates when input signal to the
equalizer is above -20dBu. EQ or Gain settings have no
effect on this indicator, as it only tells you the level of
signal applied to the equalizer.
25
40
63
100
160
250
20K
+6
+15(+6)
+4
+10
+2
+5
0
0
-3
-5
-9
-10
-
-15(-6)
+6
+15(+6)
+4
+10
+2
+5
0
0
-3
-5
-9
-10
-
-15(-6)
20K
400
630
1K
1.6K
2.5K
4K
Gain
Channel 1
EQ
Range
40Hz
In
±6dB
In
Out
±15dB
Out
dB
EQ
Range
40Hz
In
±6dB
In
Out
±15dB
Out
Gain
Channel 2

5.7 Clip Indicator

The red Clip LED turns on when any signal within
the audio path exceeds +19dBu. Clipping can be detected
at the input stage, gain stage, or at the equalizer output.

5.8 Power Switch

This front-panel push-button switches the AC
power to the unit. The adjacent yellow LED indicates
when the unit is powered on. If the yellow LED does not
light, check to see if the unit is plugged into a live outlet.
If there is still no light, refer the unit to a qualified ser-
vice technician for possible fuse replacement.
6.3K
10K
16K
Gain
+6
+15
+4
+10
+2
+5
0
0
-5
-3
-10
-9
-15
-
dB
Sig. Clip
Power
Sig. Clip
Power
EQ
Range
Sig. Clip
In
±6dB
Out
±15dB
Channel 2
5